Enhancer Pro™
Features + Benefits
- Richens color
- Heavy duty protection against all stains
- Solvent-based, interior & exterior applications
- Where to Use
- Natural stone such as marble, limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone & textured
stone. Masonry & concrete.
Directions
Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow
new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry, and free of
waxes, coatings, and previous sealers. Before application, surface should dry for 24-72 hours. Surface temperature should be
between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep
children and pets out of the area until foot traffic resumes.
- Mask off baseboards or adjacent areas.
- Liberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer,
towel, or sponge for application. Do not thin before using. Distribute sealer evenly over entire surface. Uneven penetration
will result in blotchy appearance.
- Allow sealer to penetrate surface for 15-20 minutes. Denser material may require more time to penetrate.
- Thoroughly wipe surface with multiple dry cloths to remove all excess sealer. DO NOT ALLOW SEALER TO DRY ON
SURFACE. Failure to remove sealer from surface may result in residue that may need to be mechanically removed.
- A second coat may be needed for more absorbent surfaces. If darker appearance is required, sealer should be applied one
hour after initial application, as directed in steps 2-4.
- Full cure is achieved after 24-72 hours. Avoid foot traffic for 6-8 hours after application. If foot traffic must resume
sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to
apply second coat.
- Clean equipment with mineral spirits. Rags and equipment that are wet with product may be combustible. Clean up
promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags
to dry in a well-ventilated area out of reach of children and pets. When dry, dispose of in accordance with local waste
disposal regulations.
METHOD OF APPLICATION:
- For small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local
garden center, hardware store, or home improvement center. Do not use a power sprayer. Power sprayers create a
significant amount of overspray, resulting in wasted product and the need for additional clean-up. A pump-up garden
sprayer will reduce the potential for over-exposure to vapors and produce better results.
- Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets
out of the area until foot traffic resumes.
Available Sizes (and Coverage)
Pint: 25-150 sq. ft.
Quart: 50-300 sq. ft.
Gallon: 200-1,000 sq. ft.
Expected Wear: 3-5 years.
|